US $5000.001 - 2 piece
Packging & Delivery
Min Order1 piece
Briefing
Detailed
Weare the official partner and agent for Shanghai-FANUC robotic cells, we havedeep cooperation and rich engineering experience for robotic cells used inwelding, carring and stacking.
Introductionof FANUC Smart ARC robotic welding cell
FANUCnewest and best performance robot: light and compact design model R-0iB andBuilt-in & high rigidity model M-10iA, equipped high performnancecontroller R-30iB which uses newest servo technology. With the newest digitaland smart “Smart Power” series welding power;With high qualiy, high rigiditywelding gune; with newest robotic software.
Itcan give customer high quality welding.
Roboticcells composition
Robotintegrated with welding power.
Robotcontroller can communicate with welding machine through bus or analog quantity
Wirefeeding device installed on J3 axle.
Cablesconcentrated, easy & convenient.
Robot technicalspecifications
Model No. | R-0iB | M-10iA/12 | |||
Strcuture | Multi-joint | ||||
Controlling axle | 6 axles (J1, J2,J3,J4,J5,J6) | ||||
Reachable radius | 1437mm | 1420mm | |||
Installing | On ground, up-side down, inclined | ||||
Movement range | J1 | 240o (360 o/S) (225 o/S) | J1 | 340o /360 o (230 o/S) | |
J2 | 250 o (215 o/S) | J2 | 250 o (225 o/S) | ||
J3 | 455o (255 o/S) | J3 | 445o (230 o/S) | ||
J4 | 380 o (425 o/S) | J4 | 380 o (430 o/S) | ||
J5 | 280 o (425 o/S) | J5 | 380 o (430 o/S) | ||
J6 | 720 o (625 o/S) | J6 | 720 o (630 o/S) | ||
Wrist max loading | 3kgs | 12kgs | |||
J3 arm max loading | 7kgs | 12kgs | |||
Wrist accpetable loading torque | J4 | 8.9Nm | J4 | 22Nm | |
J5 | 8.9Nm | J5 | 22Nm | ||
J6 | 3.0Nm | J6 | 9.8Nm | ||
Wrist acceptable loading inertia | J4 | 0.28kgm2 | J4 | 0.65kgm2 | |
J5 | 0.28kgm2 | J5 | 0.65kgm2 | ||
J6 | 0.035kgm2 | J6 | 0.17kgm2 | ||
Resetting accuracy | ±0.08mm | ||||
Weight | 99 kgs | 130kgs | |||
Installation enviroment | 0~45℃; ≤75%RH no condensation; Vibration acceleration speed:< 4.9 m/S2 (0.5G) |
- If use inclined installation,movement rangeof J1 & J2 axle will be limited
- In short distance movement, may not reachmax rated speed of each axle.
- Weight no including controller
Welding Power specifications
Model | SFP-C350iA | SFP-C500iA | SFP-P400iA | SFP-C350iA |
Input voltage | AC380V±25% 3 phase | |||
Input frequency | 30~80Hz | |||
Input capacity | 13.5KVA | 22.3KVA | 24KVA | 24KVA |
Rated output current | 30~400A | 30~500A | 30~400A | 30~500A |
Rated output voltage | 12~38V | 12~45V | ||
Rated utilization factor | 350A@100% | 500A@100% | 400A@100% | 500A@60% |
Welding mode | CV | CV | CV/pulse/double pulse | |
Protection grade | IP23S | |||
Size | 300x480x620mm | |||
Weight | 48kgs | 52kgs |
Wire feederspecifications:
Model | SFP-SN100iA | SFP-SW100iA |
For robot | M-10iA/12 | R-0iB |
Wire feeder | Four wheels driving | |
Weight | 6.5kgs | |
Dimension | 300x170x200mm | |
Wire diameter | 0.8/1.0/1.2/1.6mm |
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.